Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin APS130 - (PPE+PPS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin APS130:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
NORYL GTX™ APS130 resin is a 30% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyphenylene Sulfide (PPS). This injection moldable grade has high stiffness, excellent chemical resistance, and high heat resistance. NORYL GTX APS130 resin is an excellent candidate for automotive under-the-hood applications such as ignition systems and electrical components.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 29.1 g/10min ASTM D 1238
Temperatura 300 °C -
Carico 5 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 6640 MPa ISO 527
Carico unitario a rottura 120 MPa ISO 527
Deformazione a rottura 1.5 % ISO 527
Modulo a flessione 8110 MPa ISO 178
Resistenza all'urto Charpy, +23°C 59 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 22 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, -30°C 6 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, +23°C, 3mm 21 kJ/m² ISO 179/1eA
ASTM Data
Modulo a flessione 8430 MPa ASTM D 790
Resistenza alla flessione 156 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 88 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 0.45 MPa 264 °C ISO 75-1/-2
ASTM Data
DTUL a 66 psi 267 °C ASTM D 648
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Res. Alle correnti striscianti superficiali 150 - IEC 60112
ASTM Data
Rigidità elettrica, breve periodo di tempo 22.1 kV/mm ASTM D 149
Costante dielèttrica, 60 Hz 3.3 - ASTM D 150
Resistenza superficiale 1E16 Ohm ASTM D 257
Resistenza di volume 1.2E17 Ohm*cm ASTM D 257
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1440 kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 0.02 % ASTM D 570
Densità 1440 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 120 - 150 °C -
Pre-essiccamento - Tempo 4 - 8 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 300 - 330 °C -
Temperatura dello stampo 95 - 150 °C -
Zona 1 280 - 315 °C -
Zona 2 290 - 320 °C -
Zona 3 295 - 330 °C -
Velocità di Rotazione della Vite 50 - 100 rpm -
Contropressione 0.7 - 1.4 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Applicazioni
Automotive
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.